use
- Better retention, spreading, penetration, spray quality and spray quality.
- Preservation of the properties of the product.
- Reduction of leaching.
operator protection
As part of an application made with an air jet sprayer or atomizer
• during mixing/loading
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
• during application - spray upwards
When used with a cab tractor
- PPE according to the NF EN ISO 27065/A1 standard;
- Single-use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (type A, B or C), in case of intervention on the equipment during the spraying phase. In this case, the gloves can only be used outside the cabin and must be stored outside the cabin after use;
When used with a tractor without a cab
- Category III type 4 protective suit with hood;
- Single use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (Type A, B or C), in case of intervention on the equipment during the spraying phase;
• when cleaning the spray equipment
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
When applied with a boom sprayer
• during mixing/loading
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
- Protective boots certified according to EN 13 832-3;
• during use - spray
When used with a cab tractor
- PPE according to the NF EN ISO 27065/A1 standard;
- Single-use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (type A, B or C), in case of intervention on the equipment during the spraying phase. In this case, the gloves can only be used outside the cabin and must be stored outside the cabin after use;
When used with a tractor without a cab
- PPE according to the NF EN ISO 27065/A1 standard;
- Single use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (Type A, B or C), in case of intervention on the equipment during the spraying phase;
• when cleaning the spray equipment
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (blouse or long-sleeved apron) of category III and type PB (3) to be worn over the previous clothing PPE.
As part of an application made with a spear
• during mixing/loading
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Protection suit category III type 4 or 3 (depending on the level of protection recommended in the application stage);
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
O
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
• during application: no intensive contact with the vegetation
Kulturbarsch (< 50 cm)
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Protective boots certified according to EN 13 832-3;
High culture (> 50 cm)
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Category III type 4 protective suit with hood;
- Protective boots certified according to EN 13 832-3;
• during use: intensive contact with plants, tall and short plants
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Category III type 3 protective suit with hood;
- Protective boots certified according to EN 13 832-3;
• when cleaning the spray equipment
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Protection suit category III type 4 or 3 (depending on the level of protection recommended in the application stage);
O
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (coats) of category III and type PB (3) to be used over the previous PPE;
employee protection
- PPE clothing in accordance with the NF EN ISO 27065/A1 standard and nitrile gloves for contact with the treated crop certified NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (type A)
Conditions of use of the material used
General information on good protection practices can be made available to the user:
- The use of adequate equipment in good condition and the implementation of collective protection represent the first preventive measure against occupational hazards before the implementation of individual protection.
- The use of a specific work suit or PPE must be associated with hygiene reflexes (for example, hand washing, shower at the end of the treatment) and strict behavior (for example, dressing and undressing).
- the cleaning and storage methods of reusable work clothes and PPE must be in accordance with their instructions for use.
Other safeguards
For the protection of the operator and the worker, use at least the PPE described in this adjuvant decision, combining it with the specific equipment recommended for the use of the associated chemical.
environment environment
- SP 1: Do not contaminate the water with the product or its packaging. Do not clean delivery devices near the surface of the water. Avoid contamination through yard or street drainage systems.
wild animals
- SPe 3: To protect aquatic organisms, maintain an untreated area 5 meters from water points when used as an adjuvant for insecticidal spraying on ornamental plants, "blackberries" and vines, as an adjuvant for fungicide mixtures on "blackberries" ". and for all uses as an adjuvant to a mixture of herbicides, unless the associated phytosanitary product requires a larger untreated surface.
re-entry period
- Depending on the associated phytosanitary product, but at least 24 hours.
resident
When used as an adjuvant to mixtures of insecticides for vines and ornamental plants and mixtures of fungicides for ornamental plants, a distance of at least 10 meters between the last treated row and:
- the room frequented by the people present during the treatment;
- the space that is likely to be frequented by local residents,
unless the associated plant protection product requires more restrictive application conditions or a larger untreated surface.
For use as an adjuvant for spray herbicides (all crops), growth regulators (all crops), as well as spray insecticides and fungicides on beetroot, lupine, flax, poppy, sesame, rapeseed, mustard, borage, camelina, hemp, castor, oats and sorghum, keep a minimum distance of 3 meters between the spray bar and:
- the room frequented by the people present during the treatment;
- the space that is likely to be frequented by local residents,
unless the associated plant protection product requires more restrictive application conditions or a larger untreated surface.
For applications as an additive to insecticide and fungicide mixtures on horseradish, parsley root, cress and other sprouts, ground cress, arugula, brown mustard and young shoots, blackberries and for insecticide mixtures on okra, a distance of at least least 10 meters. held between the boom and:
- the room frequented by the people present during the treatment;
- the space that is likely to be frequented by local residents,
unless the associated plant protection product requires more restrictive application conditions or a larger untreated surface.
use
- Better retention, spreading, penetration, spray quality and spray quality.
- Preservation of the properties of the product.
- Reduction of leaching.
operator protection
As part of an application made with an air jet sprayer or atomizer
• during mixing/loading
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
• during application - spray upwards
When used with a cab tractor
- PPE according to the NF EN ISO 27065/A1 standard;
- Single-use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (type A, B or C), in case of intervention on the equipment during the spraying phase. In this case, the gloves can only be used outside the cabin and must be stored outside the cabin after use;
When used with a tractor without a cab
- Category III type 4 protective suit with hood;
- Single use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (Type A, B or C), in case of intervention on the equipment during the spraying phase;
• when cleaning the spray equipment
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
When applied with a boom sprayer
• during mixing/loading
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
- Protective boots certified according to EN 13 832-3;
• during use - spray
When used with a cab tractor
- PPE according to the NF EN ISO 27065/A1 standard;
- Single-use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (type A, B or C), in case of intervention on the equipment during the spraying phase. In this case, the gloves can only be used outside the cabin and must be stored outside the cabin after use;
When used with a tractor without a cab
- PPE according to the NF EN ISO 27065/A1 standard;
- Single use nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN ISO 374-2 (Type A, B or C), in case of intervention on the equipment during the spraying phase;
• when cleaning the spray equipment
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (blouse or long-sleeved apron) of category III and type PB (3) to be worn over the previous clothing PPE.
As part of an application made with a spear
• during mixing/loading
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Protection suit category III type 4 or 3 (depending on the level of protection recommended in the application stage);
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
O
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (long-sleeved blouse or apron) of category III and type PB (3) to be worn over the previous PPE clothing;
- Certified half mask (EN 140) equipped with P3 (EN143) or A2P3 (EN 14387) filter;
• during application: no intensive contact with the vegetation
Kulturbarsch (< 50 cm)
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Protective boots certified according to EN 13 832-3;
High culture (> 50 cm)
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Category III type 4 protective suit with hood;
- Protective boots certified according to EN 13 832-3;
• during use: intensive contact with plants, tall and short plants
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Category III type 3 protective suit with hood;
- Protective boots certified according to EN 13 832-3;
• when cleaning the spray equipment
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- Protection suit category III type 4 or 3 (depending on the level of protection recommended in the application stage);
O
- Nitrile gloves certified by NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (Type A);
- PPE according to the NF EN ISO 27065/A1 standard;
- Partial PPE (coats) of category III and type PB (3) to be used over the previous PPE;
employee protection
- PPE clothing in accordance with the NF EN ISO 27065/A1 standard and nitrile gloves for contact with the treated crop certified NF EN ISO 374-1/A1 and NF EN 16523-1+A1 (type A)
Conditions of use of the material used
General information on good protection practices can be made available to the user:
- The use of adequate equipment in good condition and the implementation of collective protection represent the first preventive measure against occupational hazards before the implementation of individual protection.
- The use of a specific work suit or PPE must be associated with hygiene reflexes (for example, hand washing, shower at the end of the treatment) and strict behavior (for example, dressing and undressing).
- the cleaning and storage methods of reusable work clothes and PPE must be in accordance with their instructions for use.
Other safeguards
For the protection of the operator and the worker, use at least the PPE described in this adjuvant decision, combining it with the specific equipment recommended for the use of the associated chemical.
environment environment
- SP 1: Do not contaminate the water with the product or its packaging. Do not clean delivery devices near the surface of the water. Avoid contamination through yard or street drainage systems.
wild animals
- SPe 3: To protect aquatic organisms, maintain an untreated area 5 meters from water points when used as an adjuvant for insecticidal spraying on ornamental plants, "blackberries" and vines, as an adjuvant for fungicide mixtures on "blackberries" ". and for all uses as an adjuvant to a mixture of herbicides, unless the associated phytosanitary product requires a larger untreated surface.
re-entry period
- Depending on the associated phytosanitary product, but at least 24 hours.
resident
When used as an adjuvant to mixtures of insecticides for vines and ornamental plants and mixtures of fungicides for ornamental plants, a distance of at least 10 meters between the last treated row and:
- the room frequented by the people present during the treatment;
- the space that is likely to be frequented by local residents,
unless the associated plant protection product requires more restrictive application conditions or a larger untreated surface.
For use as an adjuvant for spray herbicides (all crops), growth regulators (all crops), as well as spray insecticides and fungicides on beetroot, lupine, flax, poppy, sesame, rapeseed, mustard, borage, camelina, hemp, castor, oats and sorghum, keep a minimum distance of 3 meters between the spray bar and:
- the room frequented by the people present during the treatment;
- the space that is likely to be frequented by local residents,
unless the associated plant protection product requires more restrictive application conditions or a larger untreated surface.
For applications as an additive to insecticide and fungicide mixtures on horseradish, parsley root, cress and other sprouts, ground cress, arugula, brown mustard and young shoots, blackberries and for insecticide mixtures on okra, a distance of at least least 10 meters. held between the boom and:
- the room frequented by the people present during the treatment;
- the space that is likely to be frequented by local residents,
unless the associated plant protection product requires more restrictive application conditions or a larger untreated surface.